客服电话:021-5835-7237 173-2132-1081 180-1647-9018
the hbc 10 control heated bath circulator heats up to a max. temperature of 250 °c. it has a high quality stainless steel bath with a volume of 8 - 13 litres. the tft display is in color and illustrates all relevant parameters. with just one key, the internal temperature regulation can be switched to external temperature regulation. the large surface of the radiator allows for an optimum heat exchange and a gentle heating process of the medium. push and turn buttons allow for intuitive menu navigation. the menu comes in different languages. the bath has a front drain valve for safe emptying. in order to drain the system, a hose is connected so there is no direct contact with the tempering fluid. with the unique wico wireless controller, the unit can be operated from a distance of up to 10 meters/3 ft.
temperature range: 20 – 250 °c
temperature accuracy: ± 0.1 k
wireless controller (wico) enables safe operation, e.g. outside of a closed fume hood
large easy to read tft display for temperature, pump speed, filling level and safety temperature
powerful, speed controlled pressure/suction pump
integrated cooling coil
adjustable safety circuit
safety classification iii (fl) according to din 12876
ul certified
pt 100 temperature probe included
electronic timer function: 0 – 99 h 59 min
visual and acoustic safety warnings
connection of a magnetic valve possible
usb / rs 232 interface for pc control and documentation using labworldsoft®, as well as updating the device software through our website
技术参数 订货号 0004137025
仪器类别: 循环水浴
根据din12876 分类: iii
根据din12876标识: fl
加热输出功率: 2500 w
最低工作温度: -20 °c
最高工作温度: 250 °c
最低工作温度: 室温 10k @1000rpm °c
最高工作温度: 250 °c
温度显示: 是
温度控制: pt 100
工作温度传感器: pt 100
安全温度传感器: pt1000
工作温度显示: tft
安全温度显示: tft
din 12876 温度稳定性: 0.01 ±k
外接温度传感器接口: pt 100
显示精度: 0.01 ±°c
外接传感器使用显示: 是
加热温度控制精确度: 0.1 ±k
灯光警报: 是
声音警报: 是
温度超出警报: 是
温度不够警报: 不
可调安全温度回路最小值: 0 °c
可调安全温度回路最大值: 260 °c
次能级保护: 是
是
浴槽最小容量: 8 l
浴槽最大容量: 11 l
泵类别: 压力/抽吸泵
泵流量(可调): 是
最大泵压力 (0升排送流量): 0.61 bar
压力泵(抽吸端)(0流量): 0.45 bar
最大排送流量 (压力 0 bar ): 31 l/min
m16x1
nw 8
浴槽最小深度: 150 mm
校准选项: 是
标准技术参数 德国工业标准din: 12876
允许连续运转时间: 100 %
外形尺寸: 275 x 456 x 506 mm
重量: 18.3 kg
允许环境温度: 5 - 40 °c
允许相对湿度: 80 %
din en 60529 保护方式 ip 21
rs 232接口: 是
usb接口: 是
电压: 230 / 100 - 115 v
频率: 50/60 hz
仪器输入功率: 2650 w
采用mini-beadbeater组织研磨器破碎的方法进行了提取霞水母刺丝囊细胞毒素的研究。首先制备霞水母刺丝囊细胞, 然后研究破碎频率、破碎时间对提取霞水母刺丝囊细胞毒素浓度的影响。结果表明, 组织研磨器能够在2—3min内破碎约90%的霞水母刺丝囊细胞
in this way, it is possible to detect the temperature of the medium during the heating with only one temperature measuring device at different interva
目前市场上带搅拌操作的反应器约占总生产工艺设备的5%~25%,而且所占比重仍在持续上升[9]。搅拌设备的复杂多样性在解决生产需求的同时增加了选型的难度。随着cfd(计算机流体动力学)技术的迅速普及,众多学者通过对搅拌器进行数值模拟,
为降低在ika旋转蒸发器内进行的单效蒸发的能耗, 设计了一套闭式压缩式热泵系统与旋转蒸发器配合使用。闭式压缩式热泵系统取代正常旋转蒸发器所需的加热器和冷肼, 为旋转蒸发器同时提供热源和冷源。在不同操作温度和处理不同原料时,
在检定电子单元重复性、电子单元引用误差前,一般需要将电导池常数设置为1.0, 目前大部分国产仪器都设置了电导池常数设置程序。也有一些电导率仪没有设置电极常数,