客服电话:021-5835-7237 173-2132-1081 180-1647-9018
universal safety heating bath for water and oil applications. with integrated carrying handles and safety temperature circuit. the hb 10 heating bath also comes with a built in dry- run control. it stops heating the bath if no medium is present. laterally arranged carrying handles allow for safe handling without the risk of burns. additionally, the newly added lock function prevents accidental change of bath settings. hb 10 has an accuracy of /-1 kelvin. the optimized 3 liter bath shape is adapted to ika rotary evaporator glassware. it therefore guarantees the fastest heat-up times. the heating bath hb 10 is designed with high-quality, recyclable materials and therefore contributes to resource-preserving production. protection shield and protective cover can be added as accessories.
universal use for both water and oil
ergonomically designed handles
safety temperature cut off
integrated dry-run control
lock function prevents accidental change of set conditions
micro-controller temperature control
accuracy /-1 kelvin
heater power 1300 watt
optimized bath volume guarantees fast heat-up
designed to work with ika rotary evaporators
技术参数: 订货号 0004068000
加热输出功率: 1300 w
加热温度范围: 室温 - 180 °c
加热温度控制: lcd
加热温度控制精确度: 1 ±k
调节器波动(3升水/90°c): 1 ±k
调节器波动 (3升硅胶油 / 50mpas / 150°c): 2 ±k
浴槽最大容量: 3 l
最小注水点: 50 mm
物料接触部分材料: 不锈钢 1.4404
固定安全温度回路: 180 °c
可调安全温度回路最小值: 50 °c
可调安全温度回路最大值: 190 °c
din 12877安全级别: ii
外部高度: 185 mm
内部高度: 134 mm
外形尺寸: 295 x 190 x 265 mm
重量: 3 kg
允许环境温度: 5 - 40 °c
允许相对湿度: 80 %
din en 60529 保护方式: ip 21
rs 232接口: 不
usb接口: 不
模拟输出: 不
电压: 220 - 240 / 100 - 120 /
100 v
频率: 50/60 hz
仪器输入功率: 1350 w
采用mini-beadbeater组织研磨器破碎的方法进行了提取霞水母刺丝囊细胞毒素的研究。首先制备霞水母刺丝囊细胞, 然后研究破碎频率、破碎时间对提取霞水母刺丝囊细胞毒素浓度的影响。结果表明, 组织研磨器能够在2—3min内破碎约90%的霞水母刺丝囊细胞
in this way, it is possible to detect the temperature of the medium during the heating with only one temperature measuring device at different interva
目前市场上带搅拌操作的反应器约占总生产工艺设备的5%~25%,而且所占比重仍在持续上升[9]。搅拌设备的复杂多样性在解决生产需求的同时增加了选型的难度。随着cfd(计算机流体动力学)技术的迅速普及,众多学者通过对搅拌器进行数值模拟,
为降低在ika旋转蒸发器内进行的单效蒸发的能耗, 设计了一套闭式压缩式热泵系统与旋转蒸发器配合使用。闭式压缩式热泵系统取代正常旋转蒸发器所需的加热器和冷肼, 为旋转蒸发器同时提供热源和冷源。在不同操作温度和处理不同原料时,
在检定电子单元重复性、电子单元引用误差前,一般需要将电导池常数设置为1.0, 目前大部分国产仪器都设置了电导池常数设置程序。也有一些电导率仪没有设置电极常数,