客服电话:021-5835-7237 173-2132-1081 180-1647-9018
high speed laboratory stirrer designed with a removable wireless controller and a digital tft display. it automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/150 - 6000 rpm. the stirrer comes equipped with a rs 232 and a usb interface to control and document all parameters, and an update of the current firmware. an integrated torque trend display is provided for the measurement of viscosity changes. the included precision stirrer shaft is 280 mm long and has a maximum immersion depth of 220 mm.
multilingual tft displayprogrammable functionsintegrated temperature measurementinterval operationtimer functionadjustable safety circuitlocked functioninfinitely adjustable speedpush-through agitator shaftsoverload protectionshort-term overload operationslim casingquiet operationerror code display
技术参数:
订货号 0025001468
最大搅拌量 (h2o):20 l
电机输入功率:176 w
电机输出功率:125 w
电机原理:无碳刷直流马达
转速显示:tft
速度范围:0/150 - 6000 rpm
转动可逆方向:不
间歇运行:是
最大粘度:10000 mpas
搅拌轴最大输出功率:125 w
允许连续运转时间:100 %
搅拌轴最大转矩:20 ncm
转速控制:无级转速
设置精度:1 ±rpm
n > 300rpm时速度测量偏差:3 ±rpm
n < 300rpm时速度测量偏差:1 ±%
搅拌桨固定:特殊输出轴
外接温度传感器接口:pt1000
温度显示:是
空心轴(停止状态可插入):不
支架固定:延长臂夹头固定
延长臂直径:16 mm
延长臂长度:220 mm
转矩显示:是
额定转矩:0.2 nm
转矩测量:趋势
扭矩测量偏差: i6 ±ncm
计时器:是
计时器显示:tft
时间设置:范围1 - 6000 min
最小温度范围:-10 °c
最大温度范围: 350 °c
温度测量精度:0.1 k
温度测量精确性:pt1000
温度偏差:±0.5(din iec 751 class a) k
温度传感器极限偏差:≤ ± (0.15 0.002xiti) k
外壳材质:铸铝涂层 / 热塑性聚合物
合格的洁净室:不
防爆:不
最长遥控距离(取决于建筑物):150 m
外形尺寸:86 x 325 x 230 mm
重量:4.7 kg
允许环境温度:5 - 40 °c
允许相对湿度:80 %
din en 60529 保护方式:ip 40
rs 232接口:是
usb接口:是
模拟输出:不
电压:230 / 115 / 100 v
频率:50/60 hz
仪器输入功率:176 w
采用mini-beadbeater组织研磨器破碎的方法进行了提取霞水母刺丝囊细胞毒素的研究。首先制备霞水母刺丝囊细胞, 然后研究破碎频率、破碎时间对提取霞水母刺丝囊细胞毒素浓度的影响。结果表明, 组织研磨器能够在2—3min内破碎约90%的霞水母刺丝囊细胞
in this way, it is possible to detect the temperature of the medium during the heating with only one temperature measuring device at different interva
目前市场上带搅拌操作的反应器约占总生产工艺设备的5%~25%,而且所占比重仍在持续上升[9]。搅拌设备的复杂多样性在解决生产需求的同时增加了选型的难度。随着cfd(计算机流体动力学)技术的迅速普及,众多学者通过对搅拌器进行数值模拟,
为降低在ika旋转蒸发器内进行的单效蒸发的能耗, 设计了一套闭式压缩式热泵系统与旋转蒸发器配合使用。闭式压缩式热泵系统取代正常旋转蒸发器所需的加热器和冷肼, 为旋转蒸发器同时提供热源和冷源。在不同操作温度和处理不同原料时,
在检定电子单元重复性、电子单元引用误差前,一般需要将电导池常数设置为1.0, 目前大部分国产仪器都设置了电导池常数设置程序。也有一些电导率仪没有设置电极常数,